LukkLukkNiceHome LM100 light module is basically a LED lamp powered by 12-24V. It is designed for installation in selected NiceHome devices.
The LED module mounted inside the NiceHome LM100 photocell enclosure, connected to the OGI socket inside the control board, will illuminate the area in front of the photocell as long as the door is open.
Similarly, if you connect the module to the FLASH socket, the module will flash like a flash.
The LED module can be mounted inside the housing of the NiceHome FILO400 and NiceHome FILO600 motors. If you wish to mount it inside the motor housing, make sure that you do not throw away the transparent cover of the module mounting location (the "black" cover is factory installed in the motor).
The package contains one module designed for one photocell. For typical installations, two modules must be purchased, one for each photocell housing.
| Power supply | 12-24V |
|---|---|
| Power consumption | 1W |
| Mounting | Inside of photocell PHR00 and PH200 or supported motors |
| Housing | Plastic |
| Protection rating | IP54 |
| Dimensions | 30 × 40 × 25 mm |
| Operating temperature | -20°C ÷ +50°C |
| Included in delivery | 1 x LED module |
